Page 3
MODELS QTREN090C • QTREN110C
5. Connect electrical wiring.
Run 120 VAC house wiring to installation location. Use proper UL
approved connector to secure house wiring to wiring plate.
Connect wires as shown in wiring diagrams.
CONNECT WIRING
7. Attach grille to
housing.
Squeeze grille
springs and insert
them into slots on
each side of
housing.
8. Push grille
against
ceiling.
6. Finish ceiling.
Install ceiling material. Cut out around housing.
INSTALL GRILLE
CLEANING & MAINTENANCE
For quiet and efficient operation, long life, and attractive appearance -
lower or remove grille and vacuum interior of unit with the dusting brush
attachment.
The motor is permanently lubricated and never needs oiling. If the motor
bearings are making excessive or unusual noises, replace the motor
with the exact service motor. The blower wheel should also be replaced.
