10
1-877-646-5288
Assembling the Nutri Ninja
®
2-in-1 Food Processor Bowl
USING THE 4 BLADE
IMPORTANT:
It is recommended to pulse until the
ingredients are mixed unless recipe instructions state
otherwise. If the unit is run continuously for more than
30 seconds, let the Power Pod rest for 1 minute before
using again.
CAUTION:
Blades are sharp! Use extreme caution
when handling the blades. Always hold them by the
shaft.
IMPORTANT:
Never run the appliance empty.
CAUTION:
Blades are removable. If pouring with the
lid removed, always remove the blade assembly first. If
using pour spout, make sure the lid is secure on the jar
by firmly pressing on the thumb tab.
Fig. 5
Fig. 6
Fig. 7
1
Place the Nutri Ninja
®
2-in-1 Food Processor Bowl on a
clean, dry, level surface.
2
Place the 4 Blade over the spindle pin inside the Food
Processor Bowl.
(Fig. 5)
3
Place ingredients in the Food Processor Bowl.
NOTE:
For best results add wet ingredients first and
then add the dry ingredients.
4
Place the Geared Lid onto the top of the Food Processor
Bowl making sure the lid is securely in place.
(Fig. 6)
5
Plug the power cord into an electrical outlet and place
the Nutri Ninja
®
2-in-1 Power Pod on top of the Geared
Lid. Pulse until all ingredients are well mixed.
(Fig. 7,
Fig. 8)
6
Once processing is completed and the blades have
stopped spinning, remove the Nutri Ninja
®
2-in-1 Power
Pod and the Geared Lid. Remove the 4 Blade.
Fig. 8
WARNING: DO NOT
try to assemble or operate the Power Pod,
Geared Lid and blades together outside of the containers.
CAUTION: If using the pour spout, make sure your thumb is
firmly pressed down on the thumb tab of the lid to secure
the lid.
CAUTION: If pouring with the lid removed, ALWAYS remove
the blade assembly first.
For best results, use short “
PULSES
” by pushing down on the button in
short, 1 second bursts until desired consistency is achieved.