background image

www.ninjakitchen.com

15

Cleaning and Maintenance

 

HOW TO STORE

1

  Secure the power cord by wrapping the cord around the 

Power Pod. Do not place anything on top of the Power 
Pod. Place the Bowl-in-Bowl Chopper inside the 40 
oz. Food Processor Bowl for storage. Store the rest of 
the attachments in a safe place where they will not be 
damaged and will not cause a hazard. 

 

RESETTING THE MOTOR THERMOSTAT

 

The Nutri Ninja

®

 2-in-1 features a unique safety system 

which prevents damage to the unit’s motor and drive 
system should it be inadvertently overloaded. If the 
appliance is being overloaded, the motor will stop. To 
reset the appliance, follow the resetting procedure below:

1

  Unplug the appliance from the electrical outlet.

2

  Remove the Power Pod and Geared Lid and empty the 

container and ensure that no food is jamming the blade 
assembly.

3

  Allow the appliance to cool for approximately 15 minutes.

4

  Replace the Geared Lid and Power Pod onto the container 

and re-plug the appliance into the electrical outlet.

5

  Proceed to use the appliance while making sure not to 

exceed the recommended maximum capacities.

 

HOW TO CLEAN

 CAUTION:

 Make sure that the Power Pod is unplugged 

from the power source before inserting or removing any 
attachment and before cleaning.

 CAUTION:

 

DO NOT 

immerse the Power Pod or the 

Geared Lid in water or any other liquid. 

1

  Separate all parts from each other.

2

  Clean the Power Pod with a damp cloth and wipe dry. 

3

  Place blender pitcher, food processor bowl, chopping 

bowl and single serve cups on the bottom rack of the 
dishwasher. Place the storage lids, Sip & Seal

 lids 

and attachments on the top rack. 

Use caution when 

handling the blade assemblies as the blades are 
very sharp. 

4  The Geared Processor Lid is NOT dishwasher 

safe. DO NOT SUBMERGE. Hand wash only.

 NOTE:

 You may also wash the containers by filling 

the container to the Max Fill line with warm water and 
a drop of dish washing detergent, placing the blade 
assembly in the container, Geared Lid and Power 
Pod on top and pulsing a few times. Do not fill the 
container past the Max Fill line with water because 
it will overflow. Once clean, remove the Power Pod, 
Geared Lid and blade assembly. Rinse the container 
and attachment under running water. Wipe the Power 
Pod with a damp cloth. Allow all the parts to dry before 
storing.

 

If the appliance needs servicing, please call customer 
service at 1-877-646-5288.

    Ranero Burger

 Ingredients:

 

4 oz 

London Broil, 2 inch chunks 

 

Salt & Pepper 

 

Non-Stick Spray

 Directions:

 

1. Place the meat into the 16-ounce Nutri Ninja

®

 Cup.

 

2. Hold down and blend continuously for 15 seconds. Form into one single patty and season with salt and pepper.

 

3.  Spray a large skillet with non-stick spray and over med-high heat, cook the burger 2-3 minutes per side for 

medium rare, or up to 5 minutes per side for well done. Serves 1.

Suggested Recipe

Summary of Contents for Nutri QB3000 series





















Reviews: