Nutri Ninja QB3000NZ, Owner'S Manual

11

CUSTOMER CARE - NZ: 0800 002 999

Cleaning and Maintenance

HOW TO STORE

1

  Secure the power cord by wrapping the cord around the 

Power Pod. Do not place anything on top of the Power 
Pod. Store the rest of the attachments in a safe place 
where they will not be damaged and will not cause a 
hazard. 

RESETTING THE MOTOR THERMOSTAT

 The 

Nutri Ninja

™

2-in-1

features a unique safety 

system which prevents damage to the unit’s motor and 
drive system should it be inadvertently overloaded. If the 
appliance is being overloaded, the motor will stop. To 
reset the appliance, follow the resetting procedure below:

1

  Unplug the appliance from the electrical outlet.

2

  Remove the Power Pod and Geared Lid and empty the 

container and ensure that no food is jamming the blade 
assembly.

3

  Allow the appliance to cool for approximately 15 minutes.

4

  Replace the Geared Lid and Power Pod onto the container 

and re-plug the appliance into the electrical outlet.

5

  Proceed to use the appliance while making sure not to 

exceed the recommended maximum capacities.

HOW TO CLEAN

 CAUTION:

 Make sure that the Power Pod is unplugged 

from the power source before inserting or removing any 
attachment and before cleaning.

  CAUTION: DO NOT 

immerse the Power Pod or the 

Geared Lid in water or any other liquid. 

1

  Separate all parts from each other.

2

  Clean the Power Pod and Geared Lid with a damp cloth 

and wipe dry. 

3

  Place food processor bowl, chopping bowl and single 

serve cups on the bottom rack of the dishwasher. Place 
the storage lids, Sip & Seal

™

 lids and attachments on 

the top rack. 

Use caution when handling the blade 

assemblies as the blades are very sharp. 

 NOTE:

 You may also wash the containers by filling the 

container to the Max Fill Line with warm water and 
a drop of dish washing detergent, placing the blade 
assembly in the container, Geared Lid and Power Pod 
on top and pulsing a few times. Do not fill the container 
more than Max Fill Line with water because it will 
overflow. Once clean, remove the Power Pod, Geared 
Lid and blade assembly. Rinse the container and 
attachment under running water. Wipe the Power Pod 
and Geared Lid with a damp cloth. Allow all the parts to 
dry before storing.

If the appliance needs servicing, please call customer 
service at 0800 002 999 or 1800 890 840.