16
6
To begin blending
,
select
a manual speed or
program on the
Blending
Control Panel
. To pause
blending, press the current
speed or program once,
the unit will stop running
and the timer will pause.
To
resume blending,
press a
manual speed or the same
program again.
NOTE:
Go to the blending control
panel section on pages 20-23 for
speed and program definitions,
images, and other information.
CAUTION:
Do not use any
apparatus other than the
tamper to push ingredients
toward the blade. The tamper
is specifically designed not to
come in contact with the blade.
Spatulas, spoons and other
tools are long enough to reach
the blade, which may result
in damage to the machine,
damage to property, and
possible injury.
NOTE:
If you need to add
additional ingredients while
blending, switch the setting to
LOW
and remove the lid cap
from the pitcher lid, leaving the
lid attached. Add ingredients
through the hole in the top
of the lid, followed by the
tamper if necessary. Replace
the lid cap, then increase to
your desired speed.
DO NOT
attempt to add items through
the vent hole when blending
HOT
ingredients.
