background image

•  Do not let the power supply 

cord hang over the edge of a 

table or countertop.

•  Do not let the power supply 

cord touch hot surfaces, 

including stove, or become 

knotted or tangled.

•  This unit has a polarized  

plug. To reduce the risk of 

electric shock, this plug will 

fit into a polarized outlet 

only one way. If the plug 

does not fit fully inside the 

outlet, reverse the plug. 

If it 

still |does not fit, contact a 

qualified electrician.

•  Regularly inspect the power 

cord, plug, and appliance 

for any damage. 

Do not 

operate any appliance with 

a damaged cord or plug or if 

the appliance malfunctions, or 

is dropped or damaged in any 

manner.

 Contact Customer 

Service for assistance at  

1 (800) 523-5993.

ADDITIONAL 

SAFEGUARDS

•  Remove and safely discard 

any packaging material or 

promotional labels before 

using the appliance for the 

first time.

•  Do not put any non-food 

items in any of the appliance 

pieces, as doing so may 

damage the unit and or cause 

severe personal injury or 

property damage.

•  This appliance is not intended 

to be an ice crusher. 

Attempting to crush ice may 

cause permanent damage  

to the blades or cause  

the unit to malfunction, 

resulting in personal injury  

or property damage.

•  Make sure you have removed 

any rind from fruit prior to 

adding to the bowl. Do not 

use fruits that contain seeds 

or pits unless they have been 

completely removed.

•  Do NOT attempt to use blade, 

cup or bowl attachments 

from another nutribullet

®

 

or a magic bullet

®

 product 

with the nutribullet

®

 Food 

Processor. Only use the bowl 

and blade attachments that 

come with your unit.

•  The use of attachments not 

recommended or sold by 

Capital Brands Distribution, 

LLC may cause personal 

injury or property damage.

•  Ensure that the surface where 

the appliance operates is 

stable, level, clean, and dry.

•  Vibration may occur during 

normal operation.

•  Any significant spillage 

onto the surface under or 

around the appliance, or 

onto the appliance itself, 

should be cleaned and dried 

before continuing to use the 

appliance.

•  When using this appliance, 

provide adequate air space 

above, below, and on all sides 

for circulation.

•  Periodically inspect all 

nutribullet

®

 components 

for damage or wear that 

may impair proper function 

or present an electrical 

hazard. Make sure that the 

power cord and plug are 

undamaged. Discontinue 

use and replace if you 

detect damage to the motor 

body, work bowl, or any 

attachments. Ensure that the 

blades rotate freely and that 

the structure is undamaged. 

Follow the recommended 

procedures in the Care 

and Maintenance section 

of this guide, and never 

operate your nutribullet

®

 with 

damaged components.

!

•  If your nutribullet

®

 

malfunctions in any way, 

immediately discontinue use 

and contact Customer Service 

at 

1 (800) 523-5993.

 You may 

purchase new nutribullet

®

attachments, or other parts 

at nutribullet.com or by 

contacting Customer Service.

•  If you have any questions or 

comments, or if some aspect 

of this user guide is not clear, 

please contact Customer 

Service for assistance at  

1 (800) 523-5993.

Save these 

instructions!

5

4

Summary of Contents for NBP50100
















Reviews: