4
Place the
Work Bowl,
with
lid attached, onto the
Motor Base.
Turn the bowl
clockwise to lock into place.
You should hear a click
when the bowl is properly
locked into place.
3
Place the
Work Bowl Lid
on top of the
Work Bowl
.
Turn the lid clockwise, lining
up the arrows on the lid and
handle, to lock into place.
Place the
Dual-Size Food
Pusher
into the
Feed Chute.
NOTE:
The motor will not run unless
the lid is locked into place.
5b
If you need to add liquid
while processing, unlock
the
Inner Pusher
by
turning the
Pusher Cap
clockwise. Once unlocked,
lift the
Inner Pusher
and
drizzle liquid through the
narrow chute.
NOTE:
Do not fill liquid ingredients
past the
LIQUID MAX
line.
5a
Plug in the unit, then press
your desired speed to
start processing food. The
blue light will illuminate
over the speed that is
currently running.
HIGH
PULSE
OFF
LOW
6
When you’re done, press
the
OFF
button. Wait until
the
Chopping Blade
has
come to a complete stop.
Remove the
Work Bowl
by turning the handle
counterclockwise to unlock
it from the
Motor Base
. Lift
the bowl up off the base
and set it on a flat surface.
7
Remove the
Work Bowl
Lid
from the
Work
Bowl
by turning the lid
counterclockwise to unlock.
Carefully remove the lid
and set it aside.
OFF
LOW
HIGH
PULSE
8
Carefully remove the
Chopping Blade
and the
Blade Adaptor
from the
Work
Bowl
and set them aside.
CAUTION:
Blades are sharp! Handle
carefully. Keep fingers away from
the blade’s sharp edges. Always hold
blades by grasping the plastic areas.
9
Remove your food from the
Work Bowl
using a spatula
or spoon. Dispose of any
leftover food in the bowl,
then clean the bowl, blades,
and other parts to avoid
food residue buildup.
OFF
LOW
HIGH
PULSE
15
14
Summary of Contents for NBP50100
Page 1: ...User guide FOOD PROCESSOR ...