www.NutriChefKitchen.com
8
6.
During drying process, you can change or check the drying time.
Press the
TEMP/ TIME
button first, then press the
+
or
-
button. Press
TEMP/
TIME
button, you can check the setting time.
7.
During drying process, press the
START/STOP
button, all functions will be
paused. Screen no display.
8.
In standby mode, you can press the
START/STOP
button directly to get into
default mode (
TIME:10 hours TEMP: 70°C/158°F
). You also can change the
drying time and temp if needed.
9.
When the set time counts down to
0000
, the heating element stops working
first. The fan will continue running for 10 seconds and the buzzer rings 20 times
"
beep
" sound (1 time/second).
10.
Unplug the unit from the power point.
NOTE:
·
Set low temperature for thin/small pieces of food or for a small load of food.
Set high temperature for drying thick/big pieces of food and large loads.
The thermostat can also be used to decrease the temperature as the food is near
the end of its drying cycle making it easier to control the final moisture level in
the food.
·
Make sure that the fan base is always in place when operating the dryer. If you
do not have time to dry all the food in one day, you can dry them the next day. In
this case, you should store the food in a container/polyethylene bag and put it in
the freezer.
Hints
·
This dehydrator includes 6 trays and an overheat protection. The host contains
heating elements, motor, fan and thermostat.
·
The air vents on the tray allow air to be circulated.
·
Using a controlled heat temperature, Air from the back flow into each tray
drying moisture.
