background image

● Safety precautions 
 

1. Power source must be suitable for the standards of the Ice maker. If the voltage 
fluctuation range is big (Out of the rated voltage ± 10%), the ice maker may not 
work smoothly. In such conditions, please use the ice maker with a voltage 
regulator. 

 

2. Hazardous articles which are explosive and flammable are prohibited to put 
inside the ice maker. As well as highly corrosive acid and alkali.   
3. While the power cord is damaged or the plug is in fault, stop using ice Maker. 
Cable and plug should be replaced by professional service people.   
4. Firmly pull the plug to unplug it from any connected socket; do not pull on the 
cable for unplugging.     
5. Do not use the ice maker in a place with coal gas or other flammable gas leakage.   
6. Before cleaning or maintenance e, remember to unplug the unit.   
7. The Ice maker is made specifically for making ice cubes; do not use it to 
refrigerate food or beverages, so as to avoid machine damage.   
8. Do not use or store gasoline or other flammable materials besides Ice in the 
maker, so as to avoid damage and personal injury.   
9. Unplug the  cable before moving Ice maker, so as to avoid the damage to the 
refrigerating system.   
10. Without professional service people or technicians, do not break down or open 
panels on the Ice maker, so as to avoid damage and personal injury.   
11. Only use the appliance for its intended purpose. The appliance is not intended 
for use by persons (including Children) whose physical and mental ability is flawed, 
or those who lack of experience and electrics knowledge, including children. Only 
certified service technicians or repairmen should access any form of repair 
troubleshooting. 
12. Never let children operate the appliance alone.       

 
 
 

 

Summary of Contents for PICEM70









Reviews: