Automatic switch-off
The appliance has a built-in timer and will automatically shut down when
the countdown reaches zero. You can manually switch the appliance
off by pressing the timer buttons until it shows zero or by pressing the
cancel button one time. In either case, the appliance will automatically shut
down within 20 seconds.
Electromagnetic fields (EMF)
This appliance complies with all standards regarding electromagnetic fields
(EMF)
. If handled properly and according to the instructions in this user
manual, the appliance is safe to use based on scientific evidence available
today
Before first use
1. Remove all packaging materials and stickers or labels.
2. Clean the basket and pan with hot water, wash using liquid soap and a
non-abrasive sponge. These parts are safe to be cleaned in dishwasher.
3. Wipe inside and outside of the appliance with a cloth. And there is no
need to fill the pan with oil or lard as the appliance works on hot air.
Using the appliance
1. Place the appliance on a stable, horizontal and even surface.
Do not place the appliance on non-heat-resistant surface.
2. Put the basket in the pan. (fig.3)
Do not fill the pan with oil or any other liquid.
3. Preheat the appliance for 3 minutes when it is cold. Press the WARM-UP
“+” first, and then press the power on button to start the appliance to warm
up gradually. After the warming-up, carefully pull the pan out of the air fryer.
Caution
：
The appliance will stop heating after the pan is pulled out
，
the air
blower will stop in 5 seconds.
（
fig.4
）
4. Place the ingredients in the basket, and then pull the basket into the
appliance.
（
fig.5
）
5. Select proper function and temperature for the ingredients. See section
'settings' in this chapter to determine the right temperature.
（
Fig. 7
）
Notes
：
There are two knobs (TIME '+' & '-') in the control panel which can
adjust time setting - Increase/Decrease 1 minute per a press or increase/
-
decrease rapidly in the unit of 1 minute by long pressing. There are two
knobs(TEMP '+' &'—') in the control panel which can adjust temperature
setting - Increase/Decrease 5 degrees per a press or increase/decrease
rapidly in the unit of 5 degrees by long pressing.
Tip:
Before you switch on the appliance, you can press power on/off icon to
cancel the selected setting, the setting will recover to default setting (320
°F
and 15 minutes).
3
