6. To switch on the appliance, just press the power on/off icon, it will beep
for 1 time and then start work according to selected temperature and time.
If you didn’t select the temperature and time, it will work according to the
default temperature and time (320
°F
and 15 minutes), the LCD display will
show set temperature (not the real-time temperature) and time, the timer
start to counting down.
7. The heating-up icon and blower icon will be blinking during the running
of the applicant. (Fig. 6)
Caution:During the hot air frying process, the heating-up icon blinks and
keep lighted from time to time. This indicates that the heating element is
switched on (temperature is below the setting) and off (temperature reaches
the setting) to maintain the set temperature.
8. Oil from the ingredients will gather in the bottom of the pan.
9. Some ingredients require to shake halfway during the preparation time
(
see section 'settings' in this chapter
)
. By this way, pull the pan out of the
appliance by the handle and shake it. Then slide the pan back into the air
fryer.
(
Fig.8
)
Tip
：
1. when you pull the pan out during working, the appliance will power
off automatically.
2. when you slide the pan back into appliance, it will continue to work
for rest time at selected temperature
3. If you press power on/off icon after you pull the pan out, when you
slide the pan back, it will not continue to work, you should restart the
appliance, and setting will recover to default setting.
4. You can remove the basket from the pan and shake the basket only
to reduce the weight. Do like this, pull the pan out of the appliance,
place it on the heat-resistant holder and press the button of the handle.
（
Fig.10
）
Caution
：
Do not press the button of the handle during shaking
（
fig.9
）
10. When you hear the “beep” for 5 times, the set preparation time has
elapsed. Pull the pan out of the appliance and place it on the heat-resistant
holder.
Note
：
After it beeps for 5 times, the air blower will stop in 20 seconds.
11. Check if the ingredients are ready.
Note
：
If the ingredients are not ready yet, simply slide the pan back into the
appliance and adjust the settings of TIME&TEMP.
If the ingredients are not ready yet, simply slide the pan back into the
appliance. Press the temperature control knob to adjust Temperature
setting, and press the Timer control knob to adjust time setting. And then
press the Start knob to run the appliance.
4
