www.NutrichefKitchen.com
06
PREPARATION
Adding water to the tank:
Pour the purified water or distilled water into the tank to
reach the MAX logo then rotate the cover on the tank.
CAUTION:
1. Do not use tap water or mineral water which may cause the incrustation scale on
water tank.
2. Make sure not to add too much water to the tank.
Water cannot exceed the MAX logo.
3. Only purified water can be poured into the tank.
FUNCTIONS & OPERATION
The appliance has powerful two functional modules (Steam, Stir ).The appliance is
designed for making fresh food to feed the babies. Operate these two functional
modules easily according to the
Function & Operation
from the user's manual.
www.NutrichefKitchen.com
07
3. Put the food into steaming basket.
Cut the solid food into small chunks (not exceed 1.5cm)
see picture 5.
7. Press the stirring button to start the stirring function. Releases the button (the
continuous time for stirring must be less than 15 seconds every time) until the food
reaches the required thickness. And it stops stirring.
Caution:
1. If theres small cube sticks to the cup wall, please remove the stirring cup from the
main body and open the lid. Take out the small cubes using a spoon.
2. If bigger cubes still needs to be stirred in the cup, press the “Stir” button to start
stirring until its done.
1. Add water (it is suggested about 200ml pure
water) into tank first before steaming.The water
capacity depends on the hardness and tough-
ness of food. The more water you add, the longer
the steaming time you spend. You can add the
appropriate capacity of water into the tank again
(see picture1,2).
2. Holding the stirring cup and then rotate the lid
clockwise. (see picture 3 and picture 4)
CAUTION:
DO NOT steam large amount of solid food at a time.
A large amount of solid food should be steamed
separately for several times.
4. Put the steaming basket into stirring cup and
cover the lid.Then you can rotate the cup
counterclockwise in the proper position (The
logo " " of stirring cup lid should be aligned to
the logo " " or handle). (see picture 6,7)
5. Put the stirring cup on the cup seat and rotate
the timer knob to setting time (The cup seat, the
logo " " of stirring cup should be aligned to the
"close " logo on the cup seat).Then the stirring
function is working. (please take reference
according to user's manual’s "steaming time").
Then it starts to steam. see picture 8,9.
6. Remove the stirring cup and unscrew the lid
after steaming. Take the steamed food from the
steaming basket into the stirring cup and cover
the lid. Put the stirring cup on the cup seat and
rotate the cup counterclockwise into proper
position. The steaming basket should be placed
near the appliance or clean it immediately. (Add
the other ingredients for mixing, such as pure
water, milk and sugar) see picture10,11.
