10
show the default pressure keeping time 00:15.
Adjust the keep pressure time if desired by pressing
“+” and “-”
buttons.
Use
“+”button
to increase the time and
“
-
“ button to decrease the time in 1 min increment .
4. Press
“on/off warm”
button with a beep sound, the
“add pressure”
indicator light will turn on, and the LED will
display _
0:15 (“_”
if the LED is moving up and down and
":"
is blinking at same time, this means the inside air
pressure is increasing
).
Until the Pressure inside is stable
,
the LED will change to
P:15 and will start counting down
from P:15, P:14 ~ to 00:00
and
end
with a triple beep sound, and then enter “keep warm” automatically. At that point
the
“add pressure”
indicator light will turn off, and the “
Warm”
indicator light will start blinking. LED will start at
00:00 and count up. Until you press
“on/off warm”
button, the cooker will continue to keep warm for 24 hours.
5. You can cancel the keep warm by pressing the
“
on/off warm
”
button
，
all the indicator lights will turn off, the LED
will display
“
00:00
”
,
and the cooker will be in standby mode.
6. Open the lid until the pressure valve is down,
(you can’t open the lid if the pressure valve is up).
Pressure valve will
move down when internal pressure is released. You can adjust the steamer valve handle direction to release the pressure
or just wait approximately 5 to 8 minutes until the pressure is released automatically.)
SOUP MODE: (Time Range is 00:10-00:40)
1. Prepare food for
“SOUP”.
2. Place the removable cooking pot in its place and close the Lid
3. Press
“SPARERIB” button
with one beep sound, indicator light of “
SPARERIB” button
is On
，
LED display will
show the default pressure keeping time 00:25.
Adjust the keep pressure time if desired by pressing
“+” and “-”
buttons.
Use
“+”button
to increase the time and
“
-
“ button to decrease the time in 1 min increment .
4. Press
“on/off warm”
button with a beep sound, the
“add pressure”
indicator light will turn on, and the LED will
display _
0:25 (“_”
if the LED is moving up and down and
":"
is blinking at same time, this means the inside air
pressure is increasing
).
Until the Pressure inside is stable
,
the LED will change to
P:25 and will start counting down
from P:25, P:24 ~ to 00:00
and
end
with a triple beep sound, and then enter “keep warm” automatically. At that point
the
“add pressure”
indicator light will turn off, and the “
Warm”
indicator light will start blinking. LED will start at
00:00 and count up. Until you press
“on/off warm”
button, the cooker will continue to keep warm for 24 hours.
5. You can cancel the keep warm by pressing the
“
on/off warm
”
button
，
all the indicator lights will turn off, the LED
will display
“
00:00
”
,
and the cooker will be in standby mode.
6. Open the lid until the pressure valve is down,
(you can’t open the lid if the pressure valve is up).
Pressure valve will
move down when internal pressure is released. You can adjust the steamer valve handle direction to release the pressure
or just wait approximately 5 to 8 minutes until the pressure is released automatically.)
On/Off/Warm button
Cooker will automatically keep warm for 24hours after cooking is finished, the “
WARM
” indicator light will be on and
LED Will show 00:00 and count up.
1.
In standby mode, press
On/Off/Warm button
1 time, cooker will start keep warm. Press this button again ,it will
switch to standby mode
2.
When choose any function ,and press
On/Off/Warm button
1 time
，
cooker will start cooking , press
On/Off/Warm button
again
,
means Cancel the cooking and cooker enter into standby mode, press this button the
third time ,means keep warm
Preset function
Caution:
this functions allows you to delay the cooking process on food for up to 23:50 however, we do not recommend
Summary of Contents for PKPRC66
Page 1: ......
