NUTRICHEF PKPRC66 Manual Download

Page: 14 / 14

MALFUNCTIONS AND SOLUTIONS

MALFUNCTION

REASONS

SOLUTION

LID DOES NOT

SEAL RING IS INSTALLED IMPROPERLY

REINSTALL THE SEALING RING

THE PRESSURE VALVE IS SEIZED UP BY

THE ROD

PUSH THE ROD WITH YOUR HANDS

CAN NOT OPEN THE

LID

THE PRESSURE VALVE DOES NOT FALL

DOWN AFTER AIR HAS ESCAPED

PRESS THE FLOAT WITH CHOPSTICKS OR

SIMILARLY SHAPED OBJECT

AIR LEAK FROM

THE RIM OF THE LID

SEAL RING IS NOT INSTALLED

INSTALL THE SEAL RING

RESIDUE ON THE SEAL RING

CLEAN THE SEAL RING

THE SEAL RING IS WORN OUT

REPLACE THE SEAL RING

THE LID IS NOT LOCKED PROPERLY

CAREFULLY RE-LOCK THE LID

AIR LEAK FROM

THE PRESSURE

VALVE

VISUAL RESIDUE ON THE SEAL RING FOR

PRESSURE VALVE

CLEAN UP THE SEAL RING FOR PRESSURE

VALVE

THE SEAL RING IS WORN OUT

RENEW THE SEAL RING FOR FLOAT

THE PRESSURE

VALVE DOES NOT

RISE

THE PRESSURE VALVE IS NOT IN THE

POSSITON OF “

⊙

”

CAREFULLY PLACE THE PRESSURE LIMIT

VALVE TO THE POSSITION OF “

⊙

”

THERE’S NOT ENOUGH FOOD AND WATER

PUT ENOUGH FOOD AND WATER IN THE

INNER POT

Summary of Contents for PKPRC66















Search results

Summary of Contents for PKPRC66

Reviews:

Related manuals for PKPRC66

Brands by name

Popular brands

NUTRICHEF PKPRC66, Manual

Search results

Summary of Contents for PKPRC66

Reviews:

Related manuals for PKPRC66

Brands by name

Popular brands