background image

4

IMPORTANT SAFEGUARDS

 

Please read all of these instructions thoroughly.
When using electrical appliances, basic safety precautions should always be followed 

including the following:

• Read all instructions.
• To protect against risk of electrical shock 

DO NOT

 put motor base or power cord in 

water or other liquid. 

• Close supervision is necessary when any appliance is used by or near children. 
• Unplug from outlet when not in use, before putting on or taking off parts, and before 

cleaning.

• Avoid contacting moving parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance 

malfunctions, or is dropped or damaged in any manner. Return appliance to the 

nearest authorized service facility for examination, repair, or electrical or mechanical 

adjustment.

• The use of attachments not recommended or sold by the manufacturer may cause 

fire, electric shock or injury.

• Do not use outdoors.
• Do not let cord hang over edge of table or counter.
• Do not let cord or unit contact hot surface, including the stove.
• Do not unplug from electrical outlet by pulling on the cord. To unplug, grasp the plug 

and pull.

• Do not put your fingers or other foreign objects into any of the mill's openings while 

it is in operation.

• Do not leave mill unattended while in use.
• Do not clean mill by inserting pointed objects into milling chamber or using running 

water.

• This appliance has a polarized plug (one blade is wider than the other). To reduce 

the risk of electric shock, this plug will fit in a polarized outlet only one way. If the 

plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a 

qualified electrician. Do not modify the plug in any way.

SAVE THESE INSTRUCTIONS

Summary of Contents for plus













Reviews: