background image

  

 

Open 

Vertical 

Electric 

34 

 

www.nuvair.com 

  

 

 

 NUVAIR COMPRESSOR SYSTEM WARRANTY 

 

Nuvair extends a limited warranty, which warrants the compressor System to be free from defects in materials 
and  workmanship  under  normal  use  and  service  for  a  limited  period.    All  other  Original  Equipment 
Manufacturer (OEM) components used in the system are warranted only to the extent of the OEM’s warranty to 
Nuvair.    Nuvair  makes  no  warranty  with  respect  to  these  OEM  components,  and  only  warrants  the 
workmanship that Nuvair has employed in the installation or use of any OEM component.  This warranty is not 
transferable. 
 
Nuvair will, at its discretion and according to the terms as set forth within, replace or repair any materials which 
fail  under  normal  use  and  service  and  do  not  exhibit  any  signs  of  improper  maintenance,  misuse,  accident, 
alteration,  weather  damage,  tampering,  or  use  for  any  other  than  the  intended  purpose.    Determination  of 
failure  is  the  responsibility  of  Nuvair,  which  will  work  together  with  the  customer  to  adequately  address 
warranty issues.  When any materials are repaired or replaced during the warranty period, they are warranted 
only for the remainder of the original warranty period.  This warranty shall be void and Nuvair shall have no 
responsibility  to  repair  or  replace  damaged  materials  resulting  directly  or  indirectly  from  the  use  of  repair  or 
replacement parts not approved by Nuvair. 
 

Maintenance Items: 

Any materials which are consumed, or otherwise rendered not warrantable due to processes applied to them, 
are considered expendable and are not covered under the terms of this policy.  This includes maintenance and 
consumable items listed as part of a suggested maintenance program included with system documentation. 
 

Return Policy: 

Application  for  warranty  service  can  be  made  by  contacting  Nuvair  during  regular  business  hours  and 
requesting a Return Material Authorization number.  Materials that are found to be defective must be shipped, 
freight pre-paid, to the Nuvair office in Oxnard, California.  Upon inspection and determination of failure, Nuvair 
shall  exercise  its  options  under  the  terms  of  this  policy.    Warranty  serviced  materials  will  be  returned  to  the 
customer  via  Nuvair’s  preferred  shipping  method,  at  Nuvair’s  expense.  Any  expedited  return  shipping 
arrangements to be made at customer’s expense must be specified in advance. 
 

Limitation of Warranty and Liability: 

Repair, replacement or refund in the manner and within the time provided shall constitute Nuvair’s sole liability 
and the Purchaser’s exclusive remedy resulting from any nonconformity or defect. Nuvair shall not in any event 
be  liable  for  any  damages,  whether  based  on  contract,  warranty,  negligence,  strict  liability  or  otherwise, 
including  without  limitation  any  consequential,  incidental  or  special  damages,  arising  with  respect  to  the 
equipment or its failure to operate, even if Nuvair has been advised of the possibility thereof.  Nuvair makes no 
other warranty or representation of any kind, except that of title, and all other warranties, express or implied, 
including warranties of merchantability and fitness for a particular purpose, are hereby expressly disclaimed. 
No salesman or other representative of Nuvair has authority to make any warranties. 

Summary of Contents for 8060









































Reviews: