IMPORTANT
INFORMATION
OVERHEATING PROTECTION
If the steam tank runs dry during operation, the heater will shut off and the machine will beep rapidly 5 times. Add water to the steam tank
to resume operation
HOW TO USE
Insert the plug into wall outlet. Blue lights will cycle to confirm power is on.
Open Steam Tank lid by turning counter - clockwise, add 180ml of water into Steam Tank, close
Steam Tank Lid by turning clockwise. Bowl is marked with 180ml measurement line for your
convenience.
Place Blade in bowl by simply dropping the blade on the driveshaft without turning it. It will sit loosely
in the Bowl. Do Not lock in the Biade by turning it or pushing it down.
Always make sure driveshaft and driveshaft gasket are properly inserted into Bowl before steaming
or blending. Use of the machine without the Driveshaft and Gasket will result in water damage to the
Base.
Add desired ingredients to Bowl, close Bowl Lid securely by turning clockwise
(see “attaching lid
and bowl” below)
Make sure safety tab on bowl lid is fully inserted into base or machine will not start.
Add 180ml water
1
Add ingredients
2
Choose steam time
and press start
3
ATTACHING LID AND BOWL
Turn bowl clockwise
to lock on base
Unlock
Lock
Turn lid
clockwise
to lock on
to bowl
Turn lid counter-
clockwise to
release from bowl
Lid locked
Lid unlocked
COOKING AND CONTROLS
LCD display:
indicates function and time
Press and hold to blend
Press to start
Press to steam only
Press STOP button any
time to stop functions
and clear LCD display
Press to use bottle
warmer mode
Press to automatically
blend after steaming
Steam and Blend function
Steam only function
Blend only function
Press “steam + blend
” repeatedly until
desired cooking time is selected. Each press adds
5 minutes to steam time. Up to 30 minutes. Total
steam time will be indicated on LCD screen.
Press “start” button to begin the steam cycle;
once the steam cycle is complete, the blend
cycle will run for 30 seconds and then the
machine will shut off.
For a smoother consistency, press and hold the
“blend
” button to blend more.
If you would like to steam without the automatic
blend cycle, press the “steam
” button
repeatedly until desired steam time is selected.
Press “start” button to begin the steam cycle; the
machine will beep 3 times and shut of when steam
cycle is complete.
Make sure bowi lid is locked onto bowl; then
press and hold “blend
” button until desired
consistency is achieved. Do not remove lid when
blade is moving.
WARM MILK FUNCTION
To maximize the speed and
performance of our Pappasana
vapor Plus, it is very important
that the correct amount of tap
water is added to the steam tank
prior to commencing heating.
If too little water is added to the steam tank
then the contents of the bottle may not heat
up enough or if too much water is added to the
steam tank then the contents of the bottle may
overheat
For ease of use and as a general rule then the
following should apply:
IMPORTANT
INFORMATION
For bottles with milk up to 120ml, add 12ml of
tap water to steam tank;
For bottles with milk above 120ml, add 16ml of
tap water to steam tank;
Never use more than 20ml of tap water in the
steam tank to heat baby bottles.
1.
2.
3.
IMPORTANT COOKING TIPS
Do not overfill the steam tank, it’s
normal for a little water to spray
into the bowl, but an over-full
steam tank will spray too much
water into the bowl and may pop
the steam tank lid open .
Cut ingredients to approximately 0.5 to 1cm
pieces before placing them in bowl; smaller
pieces of food steam and blend more thoroughly,
ensuring proper food texture for your baby to
easily swallow and digest.
IMPORTANT
INFORMATION
STEAMING TIME
* Please refer to measuring bottle
~10 minutes
~20 minutes
~15 minutes
~25 minutes
Cooking time
Water Quantity
Timer Table
60ml*
140ml*
100ml*
180ml*
Add water
(as per detailed table below)
1
Insert the bottle holder
into the water tank
2
Insert the bottle
and start to warm
3
HOW TO USE THE BOTTLE WARMER
1.
2.
3.
4.
5.
6.
Insert the plug into wall outlet, the blue light will illuminate
Add between 12-20ml of clean tap water into steam tank (please follow the guideline table)
Place the baby bottle or jar into the bottle holder, then cover with the adaptor ring
.
Press the “bottle button”; on LCD will lights “Bottle”
Press “start button to turn on heater. The word bottle” on LCD screen will flash repeatedly when
heater is on.
When the water is evaporated the thermostat will detect the rise in temperature and turn off the
heater. LCD will turn off when water is gone.
A full guideline table shown below:
Start
temp
5°C
5°C
5°C
5°C
5°C
5°C
5°C
5°C
Start
temp
Final
temp
37°C
37°C
37°C
37°C
70°C
70°C
70°C
70°C
Final
temp
Water
needed
17ml
12ml
16ml
20ml
42ml
38ml
40ml
45ml
Water
needed
Bottle
milk
240ml
120ml
200ml
Jar
240ml
120ml
200ml
Jar
Bottle
milk
Heat
time
6 min
4 min
5 min
6 min
10 min
8 min
9 min
8 min
Heat
time
Remember the ideal feeding temperature is just 37°C (same as breast milk from mum).
Always check the temperature of the baby milk and food before feeding your baby.
Ingredients
Cut food
into
Quantity
Steam
time
Chicken
1cm
diced
100g
20 min
Broccoli
1cm
diced
100g
15 min
Zucchini
1cm
diced
100g
20 min
Beef
1cm
diced
100g
20 min
Sting beans (fresh)
1cm
diced
100g
20 min
Peaches
1cm
diced
100g
15 min
Pork
1cm
diced
100g
20 min
Carrot
0.5cm
diced
100g
20 min
Bananas
1cm
diced
100g
15 min
Horse meat
1cm
diced
100g
20 min
Sweet peas (fresh)
Whole
100g
20 min
Plums
1cm
diced
100g
15 min
Lamb
1cm
diced
100g
20 min
Squash
1cm
diced
100g
20 min
Apples
1cm
diced
100g
15 min
Ham
1cm
diced
100g
20 min
Beans
Whole
100g
25 min
Pears
1cm
diced
100g
15 min
Veal
1cm
diced
100g
20 min
Potato
1cm
diced
100g
25 min
Oranges
1cm
diced
100g
15 min
Fish (salmon, sole,
cod, trout, etc)
1cm
diced
100g
20 min
Chickpea
Whole
100g
20 min
COOKING TIME FOR
BASIC INGREDIENTS
1.
2.
3.
4.
5.
6.
HOW TO STERILISE A BABY BOTTLE
lnsert the plug into wall outlet, the blue light
will illuminate.
Pour 140 to 180ml of clean tap water into the
steam tank
Put the bottle bracket in the water tank base
Put the bottle holder on top of water tank
Place the baby bottles upside down on the
tray above the water tank
Place the sterilisation cover on the bottle holder.
NOTE
To sterilise accessories put them between the bottle bracket and the bottle holder (in
the case of nipples and teats) or on bottles (grid).
Press the “Bottle button”; “Bottle” will appear
on the LCD display
Press “start” button to turn on the heater. The
word “bottle” will flash repeatedly on the LCD
screen when the heater is on.
At the end of the cycle, an alarm will sound to
inform that the baby bottle is ready
LCD will turn off when water is gone.
7.
8.
9.
10.
CLEANING AND MAINTENANCE
Always unplug the appliance before cleaning.
Clean the appliance before and after use.
Bowl, Blade and Bowl Lid are top shelf dishwasher safe* and can also be hand washed with warm,
soapy water. Never use abrasive pads to clean machine parts.
Never put the Driveshaft in the dishwasher.
Do not submerge steam tank or base in water.
Base and Driveshaft should be wiped with damp cloth only.
We recommend regular cleaning of the Steam Tank to prevent damage to the machine from mineral
deposits. The frequency of cleaning will depend on the type of water you are using and how much
mineral deposit build up forms.
