POWER
1
2
3
4
5
6
7
8
NV-MPS4 and MPS4-E Music Port Front Panel Features
USB Port:
NuVoNet Error LED:
LAN Error LED :
RS232 Error LED:
HDD Status LED:
Source Address LED’s:
Reset Button:
1.
Power:
This button supplies power to the Music Port when the unit is plugged into an AC power source and the button is pushed. The
associated blue LED will light.
In normal operation it will remain unlit.
2.
3.
4.
5.
6.
7.
8.
This USB port is for use by NuVo Technical Support.
The Music Port is designed to communicate via a CAT5 cable to the NuVo Essentia, Grand Concerto, and Renovia
Distributed Audio Systems. This red LED is designed to light indicating a lack of communication. With normal communication, it will remain unlit.
This red LED will light when there is no Local Area Network signal present at the RJ45
port on the Music Port back
panel, or when there is an interruption in the LAN signal. See page 8,
This red LED will light when the Music Port does not detect a serial connection at its DB9 output on the back panel.
When a serial connection is present and active, the LED will remain unlit.
This green LED will light when the Music Port’s hard drive is active.
These green LED’s 1 - 6 will light indicating the assigned source inputs on the associated NuVo Distributed Audio System.
This recessed button will reset the Music Port’s operating system when it is pushed.
Ethernet
Understanding the LAN Error LED
,
for a detailed description of the
different error states.
RS232
4
Music Port
