8
2.
Long Press the Power button to turn On the device, blue light would illuminate. It will
automatically enter LOW power mode; short press the Power button once to enter MEDIUM
power mode; and short press the Power button again to enter HIGH power mode. These 3
intensity levels circulate and change in the said order by pressing the Power button. When the
device is on, the blue light will be on; when the device is off, the blue signal light will be off. Long
Press the Power button to turn off the device.
3.
Set the device at a desired speed and on a desired place, apply pressure accordingly.
4.
Each program stops after 10 minutes of operation.
5.
When movement appears slow, place the device on the charging base for recharging.
Maintenance
Please don’t disassemble the product.
Please always turn off the main power after use.
Do not use this product if the socket is loose.
If this product is to be left idle for a long time, please tie up the power cords and keep it in
dry and dustless environment.
Do not keep this product at a high temperature or near fire. Do not keep under direct
sunlight.
Please clean this product with dry cloth. Do not use thinner, benzene or alcohol.
The mechanical components of this product are specially designed and made, no special
maintenance required.
Do not point sharp objects at this product.
Please use it intermittently; do not keep it continuously running for long.
Cleaning
Before cleaning, please make sure the switch has been turned off and the power plug has
been disconnected from the product.
Use soft cloth to clean the surface of product and control panel.
