12
Owner’s Manual
CARE & MAINTENANCE - INDUCTION WOK BASE
Before use, wipe surface with a damp
dishcloth or sponge, and dry thoroughly.
IMPORTANT
- Do not immerse unit in water
or attempt to cycle through dishwasher.
Make sure unit has cooled completely
prior to cleaning. The outer surface may be
cleaned by wiping carefully with a damp
dishcloth or sponge.
AFTER USE:
• Clean after each use.
• Unplug the unit before cleaning.
• Make sure unit has cooled completely prior to cleaning.
• The outer surface may be cleaned by wiping carefully with a damp
dishcloth or sponge.
• Remove the power plug prior to cleaning the NuWave Precision Induction
Wok
™
. Do not use caustic cleaning agents. Water should not penetrate the
interior of the Induction Wok Base.
• Never immerse the NuWave Precision Induction Wok, its cables, or plug in
water or other liquids.
• Wipe the glass surface with a damp cloth or use a mild, non-abrasive soap
solution. Make sure the unit has cooled completely before cleaning.
• Wipe casing and operating panel with a soft cloth dampened with water
or a mild detergent.
• Do not use oil-based cleansing products as their use may damage plastic
parts or the casing/operating panel.
•
Do not use flammable, acidic, or alkaline materials or substances near the
NuWave Precision Induction Wok, as this may reduce the service life of
the Induction Wok Base or pose a fire risk when the Induction Wok Base
is in use.
• In order to keep your NuWave Precision Induction Wok looking like new,
take measures to ensure that the bottom of Wok does not scrape the
unit’s glass surface, although a scratched surface will not impair the use
of the Induction Wok Base.
• Make sure to properly clean the unit before storing it in a cool, dry place.
Important Tips:
1. Check power outlets to ensure proper operation. Do not use in an outlet
where other major appliances are engaged. Check settings if the unit is
cooking too slowly.
2. The electrical plug must be properly plugged into the outlet.
3.
Always turn off and unplug the unit before wiping.