16
Owner’s Manual
CONTROL PANEL (CONTINUED)
Quick Start:
1.
After you turn the unit on, press “start” on the dial. “375F” and “TEMP”
will be displayed and the countdown will begin.
• The Wok is defaulted to 375F for 20 minutes.
Temperature Function:
Simply turn the dial to decrease or increase temperature.
• Located on the left dial.
• Temperature range 100-575F in 5-degree increments.
Time Function:
Simply turn the dial to decrease or increase time.
• Located on the right dial.
• Time range is from 1 minute to 9 hours and 59 minutes (Time is in Hours
and Minutes).
Stage Function:
1.
Press “stage”. “STAGE” will be flashing and “1”, “TIME”, and “00:00” will
be displayed.
2. Set time and adjust temperature, if needed.
3.
Press “stage” again. “STAGE” will be flashing and “2”, and “TIME”, and
“00:00” will be displayed.
4. Set time and adjust temperature, if needed.
5. Repeat steps, if necessary.
• You can create up to 10 stages. Stage 10 will display as “0”.
6. Press “start”.
Preheat Function:
1.
Press “preheat”. “PREHEAT” and “375F” will be displayed.
2.
Adjust time and adjust temperature, if needed.
• Preheat program has a default of 375F for 20 minutes.
3.
Press “start”. Selected temperature and “F” will be flashing.
4. Once the temperature you selected has been reached, “selected
temperature” and “ready” will be displayed indicating the Wok will hold
that temperature for 5 minutes or until you press “start”.
5. Once you press “start”, the countdown you selected will begin with the
programmed temperature.
•
If you press “pause” when the unit is preheating, “5” will be flashing,
indicating the Wok will hold the program for 5 minutes or until you
press “start”.