Ra.Ro. 1.0 – User and maintenance manual
Pag. 43
DOCKING STATION
The docking station must be positioned in a sufficiently large space, with at least 60 cm of space completely free
from any type of obstacle both in the front and side of the same. For information about the AUTODOCKING
procedure, see the appropriate chapter.
The peculiarities of this "charging station" are the following:
• Allowing a continuous use of the robot, the system manages independently the power supply of the same
robot and, in the meantime, recharge the batteries
• Interrupts the power supply of the contacts when the robot is not connected
The Docking Station, displayed in the figures below, is a plastic device. Ra.Ro. is recharged when all six tips on
the back of the robot get in contact with the three aluminum strips on the Docking Station. As shown in the
figures above, the six tips are divided into three levels, corresponding to the three different voltage levels.
Correct positioning of the robot in the docking station
Summary of Contents for 4W - 3013
