Ra.Ro. 1.0 – User and maintenance manual
Pag. 47
LIFTING AND TRANSPORTATION
The weight of the robot Ra.Ro. is between 15 and 20 kg (according to models), so it should be lifted and
transported only with due care. The manufacturer does not respond to breaks due to falls or lifting and / or
inappropriate transport of the robot. Every action must be performed in total safety and safeguarding the health
of the person.
STORAGE
If the robot must be stored for a long periods of inactivity (over three months), the following operations must be
carried out:
-
Turn off the main switch located at the bottom
-
Perform a general cleaning of the robot
-
Leave the robot in the packing box
-
Store it in a dry and airy place
All transport operations must always be carried out with switched off robot.
The transport of the robot must be strictly carried out using the packaging.
For transport it is recommended to place the robot on a pallet and do not
store anything over it, except its own Docking Station.
Any transport done without respecting the above may seriously damage the
robot and undermine the warranty of the product.
Negative check
–
In the case during the preliminary checks, defects of any type of
problem should be found, and even one check is negative, DO NOT USE THE
ROBOT. Immediately activate all measures to perform an appropriate repair and,
if necessary, contact the Producer.
Summary of Contents for 4W - 3013
