NV7 System
01
Issue 2017
NVELOPE Installation
Guide NV7.
NVELOPE | Method Statement — Installation Guide NV7.
NVELOPE
MAKING CLADDING HAPPEN
Components
One vertical cassette profile is supplied. The profile is supplied without the foam
tape fitted and this should be fitted in position after cutting profiles to length
NVELOPE brackets are supplied in different sizes ranging from 60 – 300mm (see
table below for cavity depths that can be formed).
NVELOPE brackets are available with hole-sizes 11 or 6.5 depending on the
diameter of the primary anchor/substrate type. If in doubt please contact technical.
Horizontal hangers for the cassette panels are secured in position with two
4.8mm x 19mm self-drilling self-tapping screws.
NV7
Cassette.
NVELOPE NV7 profiles and
components are designed
to provide a vertical support
framework to 'hook' 3mm or
4mm thick cassette panels
to any suitable building
façade. These profiles are
anchored to the building
using a purpose designed
bracket that allows final
alignment and adjustment.
For further information,
please see:
www.nvelope.com
Also download/refer to:
NV1
