Operation
64
89217391 Rev. A
©2022 nVent
10.4 Password protection
When unit-specific data are changed, the user is prompted to enter a password.
NOTE
•
The password levels 1 and 2 are preset and can be changed, if necessary.
-
Password for password level 1 = 3 1
Password level 1 is intended for users with extended access rights.
-
Password for password level 2 = 4 3 2 1
Password level 2 is intended for set-up and service personnel.
Password level 3 is exclusively reserved for nVent service technicians.
•
The required level will be displayed during the password enquiry. When a
higher level is entered, the lower levels will also be enabled automatically.
•
If no changes are made within a preset period of time, the password must
be entered again.
Password protection active.
Password-protected fields cannot be edited.
•
Tap the button to open a window for entering the
password.
•
Press the Enter key to confirm (the password) or the ESC
key to cancel the action.
•
The required password level is shown inside the padlock.
