Disconnecting the device
120
89217391 Rev. A
©2022 nVent
13.2 Transport and storage
NOTE
See also separate document "Unloading Large Enclosures with a Ramp"
(90001347552).
NOTICE
Freezing hazard
The unit may be damaged if the medium freezes inside the unit.
Drain the unit completely prior to transporting it.
NOTE
Transport the unit carefully and in a shock-free and vibration-free manner.
Comply with the information given in the "Transport" section.
Please note the following:
•
The unit must be completely drained before transport.
•
The unit must be completely drained before storage.
•
Ensure that the ambient conditions are in line with the "Technical data".
•
Use suitable packaging material (e.g., shock-absorbing and vibration-
absorbing material; preferably, use the original packaging material).
•
Ensure that the packaging will protect the unit against dust and dirt.
•
Pack the unit so that it is protected against shocks and falling down.
•
Ship the unit on a pallet only with belts wrapped around.
•
If the unit is shipped separately, use the original padding blocks and mark as
follows:
-
"Protect against moisture"
-
"Transport and store in upright position"
-
"Fragile"
