nVent.com
|
3
Raychem-AR-H
58686
-NGC
40
DemoUnit-EN-
1805
SECTION − 1
STANDARD SETUP USING RS-
232
COMMUNICATIONS
1.1 Introduction
For demonstrating the nVent RAYCHEM NGC-
40
capabilities, the NGC-
40
demo unit requires to communicate with TOUCH
1500
software
running on a TOUCH
1500
touch screen display or on your pc or laptop.
The NGC-
40
demo uses the RS-
232
port from the NGC-
40
-BRIDGE module to communicate with TOUCH
1500
software. The NGC-
40
demo ships from the factory with one RJ-
11
to
9
pin D-Sub female cable and one USB to RS-
232
serial cable. There are two methods for
interfacing the NGC-
40
demo to a computer.
Method 1: Computer has RS-232 port
If your computer has a
9
pin D-Sub male connector, then you can connect directly to the PC using the RJ-
11
to
9
pin D-Sub female cable.
RS-
232
port
RJ-
11
to
9
pin D-Sub female
cable used to connect the
NGC-
40
to your computer