40 mm
40 mm
9.
Wrap one roll of the black semi-conductive tape (18) around the cable over the
structure bonding braid. Start the wrapping 40 mm (1 1/2 in) before the copper
layer and finish 40 mm (1 1/2 in) beyond the copper layer for a total of 110 mm (4
3/8 in). Overlap the tape by half the tape thickness each turn, (see Figure 7).
Figure 7:
Black semi-conductive tape applied over bonding braid
40 mm
40 mm
IP8519_A
4 OF 11
INSTRUCTION SHEET
© 2019 nVent All Rights Reserved
TECHNICAL SUPPORT
www.nVent.com
nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its
global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change
specifications without prior notice.
