14579-030 (PXIe System)
R1.5, April 2021
8 Slot PXIe Backplane (23007-508)
15
3.7 Power-on behaviour
The power-on behaviour depends on the setting of the inhibit mode switch at the rear panel.
When the inhibit mode switch is set to
"DEF"
, the CMM controls the power supply inhibit, the
chassis can be powered by pushing the power button at the left front side.
When the inhibit mode switch is set to
'MAN'
, the chassis boots when AC-power is applied,
as long as Pin 5 at the DSUB connector is not connected to GND.
3.8 Voltage monitoring
The female DSUB-9 connector allows remote monitoring of the system voltages.
INHIBIT MODE
DEF
MAN
1 GND
2 +5 V
3 not used
4 +3.3 V
5 Inhibit
6 +12 V
7 not used
8 -12 V
9 GND
1
6
INHIBIT/
VOL
TAGE MON
5
9
FAN SPEED
AUTO
MAX
Please note the following:
In order to ensure a proper function of the DEF and MAN settings, the BIOS settings in the
embedded controller must be adjusted.
DEF Mode:
- Set BIOS Power Loss Control to "Remain Off".
MAN Mode:
- Set BIOS Power Loss Control to "Turn On".
For further information see the embedded Controller User Guide, Ord.-No: 63672-389
Summary of Contents for Schroff 14579-030
