CPCI Serial System 3+1 U
Safety
24579-415
www.schroff.biz
1
R1.0, July 20, 2011
1 Safety
1.1 Intended Application
The CompactPCI Serial system, described in this manual, is intended as a
platform for a microcomputer system based on the CompactPCI Standard
CPCI Serial CPCI-S.0.
The case systems are designed for protection class IP 20 and can be used only
in the resp. environments.
CPCI system subracks are not end-products, so there is no valid approval for
this unit. In order to enable stand-alone functionality, additional elements are
required. An operational system is achieved only by way of appropriate CPCI
Serial boards.
The completion and final testing of the units have been carried out, or at least
supervised, by qualified technicians. These instructions are directed exclusively
to these qualified technicians i.e.engineers, trained and qualified electricians
etc.
Make sure that:
•
the finished system complies with the safety regulations currently applicable
in the country it is going to be used.
•
the finished system complies with all other regulations and specifications at
the place and country of use, e.g. interference limits, approval by the tele-
communications authorities.
