16
6.
7.
Pulling the Rails Telescopic Extensions
In
s
e
rt
in
g
t
h
e
S
p
ri
n
g
L
a
tc
h
e
s
t
o
t
h
e
R
a
c
k'
s
Sl
o
ts
To mount the system into the rack:
While your installation partner is supporting the system’s weight, perform the following
steps:
Slide the rails installed on the system into the channels in the rack rails. Push them forward
until the locking mechanism is activated on both sides, and a click is heard.
Tighten the captive screws on both sides to further secure the system to the rack's posts.
Sliding the System's Rails (A) into the Rack Rails (B)
At least two people are required to safely mount the system in the rack.