February 2011
- 10 -
Flashing from Linux:
Flash your OS:
1)
Connect the USB cable from the free USB port (Type-A) on your host PC to the flashing
USB port (Mini or Micro USB, not full-sized) on the left-rear corner of the devkit.
Referred to as “Development Cable” or “ADB/USB cable”.
2)
Open a shell to the directory containing the installed flashpack
(
tegra_ventana_gb_<version>
)
3)
Run the script
ventana_flash.sh
4)
You will likely be asked to provide your super-user password if you have not already
attained “
su
”
5)
The output of the flashing script should be extremely similar to the windows output
shown in the previous section.
