Nvis 5586A
Nvis Technologies Pvt. Ltd.
56
And user wants to write whole instruction again, and then by using the <Space> keys, the
content at the location 400 will be erased as follows:
Now by using <Backspace> key user can come back again to initial position
Now enter the instruction again.
Press <Enter> key, then this input assemble language will be converted into machine
language in the memory and jump to the next memory location.
Now write the next instruction as follows:
In this way, user can enter the whole program, by pressing <Enter> key.
Now by using GO command, the machine language statements can be executed and the value
of DX will be displayed in the second line of the LCD.
Note
:
When ―A‖ and ―U‖ are being used, the operation used:
0000:1E00
0000:1FFF as the buffer.
D - Display or modify the RAM’s Hexadecimal
:
Summary of Contents for 5586A
Page 2: ...Nvis 5586A Nvis Technologies Pvt Ltd 2...
Page 23: ...Nvis 5586A Nvis Technologies Pvt Ltd 23 Memory Read Timing in Maximum Mode...
Page 30: ...Nvis 5586A Nvis Technologies Pvt Ltd 30...
Page 48: ...Nvis 5586A Nvis Technologies Pvt Ltd 48 Diagram of module RESET power Instruction Set Note...
