Nvis 5586A
Nvis Technologies Pvt. Ltd.
57
A.D.U
. is the important commands in the compiling. The effective address or both the
effective address and Segment base can be used during input. When the cursor is placed at
the beginning, the key will immediately show ―F000‖ as the Segment base and the Effective
address next.
Syntax:
D
(If no input, press Enter key or ARROW UP/DOWN key would allow the
built-in address to be used)
D 0400
(Uses built-in Segment base but specify the Effective address)
D 0:0400
(Specify both the Segment base and Effective address)
If press the <Enter> or the ARROW UP key after specifying the address, the memory will
display the data. Press ARROW UP key will allowed the address to ADD 8 and store in the
memory as a whole number. Otherwise, an ARROW DOWN key indicates an subtraction of
8 in the address and these changes in the memory (as a machine language).
Syntax:
If address is not a whole number 8, the following will show:
The above data shown at the location 400 are the arbitrary data‘s.
Example:
If the user wants to see the codes of the above program, the following steps are to be taken:
1.
Press F7 key, the menu will display.
2.
Press D key, and write the effective address. The following will be displayed:
3.
Press <Enter> key, then the following will be displayed:
Summary of Contents for 5586A
Page 2: ...Nvis 5586A Nvis Technologies Pvt Ltd 2...
Page 23: ...Nvis 5586A Nvis Technologies Pvt Ltd 23 Memory Read Timing in Maximum Mode...
Page 30: ...Nvis 5586A Nvis Technologies Pvt Ltd 30...
Page 48: ...Nvis 5586A Nvis Technologies Pvt Ltd 48 Diagram of module RESET power Instruction Set Note...
