EC-Link+
EC-LINK+
Installation Details
1. Remove the EC-Link+ from its packaging.
2. Remove all legacy equipment from the Coax cable infrastructure.
NOTE: In order to avoid damage to endpoints, it is important that non-IP devices are
not connected when you connect the EC-Link+.
3. Connect the Network Infrastructure cable from the CLEER24, EC10 or
EC-Base to the EC-Link+ (LRE side).
4. Using CAT5 or higher category cable, connect the endpoint to EC-Link+
(Endpoint side).
NOTE: EC-Link+ can be used with the CLEER24, EC10 or EC-Base
Product Details
(NV-ECLK-PLS)
•
Paired with CLEER24, EC10, or EC-Base
•
Up to 50W PoE with EC-Base or locally powered
•
Up to 30W PoE with CLEER24 or EC10
EC-Base
To Switch
To LRE
Installation Details
1. Remove the EC-Base from its packaging.
2. Remove all legacy equipment from the Coax cable infrastructure.
NOTE: In order to avoid damage to endpoints, it is important that non-IP devices are
not connected when you connect the EC-Base.
3. Connect EC-Base (Switch side) to downlink port on switch.
4. Connect the Network Infrastructure cable from the EC-Base (LRE side) to
EC-Link+ or EC4 (LRE side).
5. Using CAT5 or higher category cable, connect the endpoint to the EC-Link+
or EC4 (Endpoint side).
NOTE: EC-Base can be used with EC-Link+ or EC4
Product Details
(NV-ECLK-BSE)
•
Paired with EC-Link+, EC-Link, or EC4
•
Up to 50W PoE
NOTE: Please see page 2 for important safety instructions
•
Local power option
•
IEEE compliant
To LRE
To Endpoint
To LRE
To Endpoint
The EC-Base and EC-Link+ adapters enable extended Ethernet and PoE reach
beyond traditional distances using Coax infrastucture. The EC-Link
+
, when
connected to the EC-Base unit via Coax can deliver 10/100Mbps (symmetrical, full
duplex) and PoE++ (up to 50W) with up to 4,000ft (1,219m) reach. The EC offering
is designed specifically to enable easy deployment over Coax for reaches beyond
that of standard Ethernet eliminating the costs and disruption associated with IDF
closet requirements.
EC-Base
Activity
Link
37-55VDC In
Link/Speed
Green:
100Mbps
Orange:
10Mbps
To Switch
Activity
Link
To LRE
Toggle switch allows
option between
100Mbps
(Green)
or
10Mbps
(Orange)
37-55VDC In
Copyright 2018 NVT Phybridge | 445-0010-A | Page 1
888.901.3633 | +44 (0) 208 977 6614 | www.nvtphybridge.com
•
Local power option
•
IEEE compliant
•
PoE on 4 pairs
EC Adapter Applications
10/100Mbps (symmetrical, full duplex) and PoE++ (up to 50W) with up to 4,000ft (1,219m) reach
PoE over Coax
PoE over Coax
To Application
To Switch
Local Power Option
Local Power Option
Local Power Option
Local Power Option
Local Power Option
CLEER 24-Port or
EC10 10-Port Switch
EC-Link
EC-Link +
EC-Link
EC-Link +
EC-Base
EC-Base
EC-Base
EC4
Local Power Option
QUICK INSTALL GUIDE - EC ADAPTERS
EC-Link
+
Long Reach PoE over Coax
EC-Base
Long Reach PoE over Coax
