© by N&W GLOBAL VENDING S.p.A.
26
03-2012 3775 00
m
orE
proDucts
for
Disc
It's possible to allow the retail of different products with
different prices
After enabling this function it's possible to individually
associate products according every section of the disc and
define price.A
The association between product number (1-40) and prod-
uct is defined by machine managers
Display shows on first row the number of disc slots; use but
-
tons
�
and
�
to scroll first row and view all disc's slots.
On the second row, product number paired to that sector, is
displayed (from 1 to 40)
DISK 2
----------------------------------------------
7
6
5
4
3
2
1
33
32
28
28
2
2
2
----------------------------------------------
In the example, sections 1,2 and 3 of disc number 2, are
employed in the retail of the same product (product no.
2); sections 4 and 5 are employed in the retail of another
kind of product (product no. 28) and so on.
E
NablEs
Discs
for
timE
baNDs
This function is switched on only when the retail of differ
-
ent products from the same disc has been set.
With this function it's possible to enable the retail of prod-
ucts according the selected time band.
Operate as it follows:
-Select the product you want to affect using buttons
�
and
�
to scroll through the 40 products list.
-Press
�
-Shift over band (0,1,2 o 3) using buttons
�
and
�
-Press
�
to edit the service status of the disc according
the selected band (ON:
�
/ OFF:
�
)
band0 band1 band2 band3
prod.1
�
�
�
�
prod.2
�
�
�
�
prod.3
�
�
�
�
prod.4
�
�
�
�
prod.5
�
�
�
�
prod.6
�
�
�
�
In the example, product no. 3 is enabled to retail only in
time band 0.
DA CONFIGURATION
This group of functions controls all the parameters re-
lated to the operation of the machine.
D
atE
aND
timE
sEttiNg
This function allows you to set the current date and time.
The data is used by the machine for managing the time
band and the statistics.
In the absence of power supply the machine maintains the
set date and time by means of a buffer battery.
r
EfrigEratioN
group
The operation of the refrigeration system is programma-
ble for the following features.
r
EfrigEratioN
paramEtErs
It's possible to prevent the full operation of the refriger-
ating group. Changes will be effective by restarting the
device.
Enabling the refrigerating group you'll switch to the editing
of parameters: temperature, defrosting interval, and enable
temperature recording.
tEmpEraturE
The temperature value of the cell can be set during the
operation directly in °C (from 3.5 to 20°C),
Default temperature is 8°C (with disabled "food" manage-
ment function, or 3.5°C if enabled)
The temperature difference needed for the activation/stop
of the refrigerating group is 2°C.
fooD
maNagEmENt
The machine is set for the management of refrigerated
food distribution
-OFF: Food management disabled
Control of safety temperature (3.5°C) isn't enabled any-
more and a cellar temperature (between 8°C and 20°C)
can be set.
-ON: Control over safety temperature is enabled (3.5°C
default), pull-down time is 45 minutes default, and it's
possible to decide which discs will be blocked from
retail functions if safety temperature is reached.
All discs are blocked by default (displayed as
�
)
To make changes effective restart the device.
Summary of Contents for Festival
