Laser Site Calculator LSC60
Laser Site Calculator LSC60
44
EN
LSC60
Jump to
Also user can jump to desired record. If user wants to go to the 13th
record, user can press 1, then 3, and press
jump to the 13th record.
Delete
Long press
to delete the selected record.
Calculate
When viewing record, press + - x ÷ to calculate another record or input
number.
Quit
Press to go back to single distance measurement interface.
5. Measurement
Single Distance Measurement
View
Follow the steps below to take single distance measurement.
(1) Press
to activate the laser, and aim at the object which is to be
measured.
(2) Press
again to take measurement. Results will be seen on display
immediately.
Continuous Measurement
Long press
button, until you hear beeps,
to activate continuous measurement. Under
this mode, minimum or maximum distance
can be measured from a fixed measuring
position by sweeping ideal points.
It’s usually used to find the right angle and
diagonal. As shown in Figure (D), user
can press
or
to stop continuous
measurement, and the values of minimum
and maximum distances are shown in the
display as well as the last measured value in
the summary line.
Area Measurement
Press
once, the symbol
appears on display.
Press
!"
Press
again to take the second distance measurement (e.g. width).
The results of length, width, perimeter and area will be seen on display
orderly.
Figure (D)
