background image

HOW TO REACH US:

USA/EUROPE/LOCATIONS NOT LISTED:

Motorola Literature Distribution; 
P.O. Box 5405, Denver, Colorado 80217 
1-303-675-2140 or 1-800-441-2447

JAPAN:

Motorola Japan Ltd.; SPS, Technical Information Center, 
3-20-1, Minami-Azabu Minato-ku, Tokyo 106-8573 Japan
81-3-3440-3569

ASIA/PACIFIC:

Motorola Semiconductors H.K. Ltd.; 
Silicon Harbour Centre, 2 Dai King Street, 
Tai Po Industrial Estate, Tai Po, N.T., Hong Kong
852-26668334

TECHNICAL INFORMATION CENTER:

1-800-521-6274

HOME PAGE: 

http://motorola.com/semiconductors

Information in this document is provided solely to enable system and software 

implementers to use Motorola products. There are no express or implied copyright 

licenses granted hereunder to design or fabricate any integrated circuits or 

integrated circuits based on the information in this document.

Motorola reserves the right to make changes without further notice to any products 

herein. Motorola makes no warranty, representation or guarantee regarding the 

suitability of its products for any particular purpose, nor does Motorola assume any 

liability arising out of the application or use of any product or circuit, and specifically 

disclaims any and all liability, including without limitation consequential or incidental 

damages. “Typical” parameters which may be provided in Motorola data sheets 

and/or specifications can and do vary in different applications and actual 

performance may vary over time. All operating parameters, including “Typicals” 

must be validated for each customer application by customer’s technical experts. 

Motorola does not convey any license under its patent rights nor the rights of 

others. Motorola products are not designed, intended, or authorized for use as 

components in systems intended for surgical implant into the body, or other 

applications intended to support or sustain life, or for any other application in which 

the failure of the Motorola product could create a situation where personal injury or 

death may occur. Should Buyer purchase or use Motorola products for any such 

unintended or unauthorized application, Buyer shall indemnify and hold Motorola 

and its officers, employees, subsidiaries, affiliates, and distributors harmless 

against all claims, costs, damages, and expenses, and reasonable attorney fees 

arising out of, directly or indirectly, any claim of personal injury or death associated 

with such unintended or unauthorized use, even if such claim alleges that Motorola 

was negligent regarding the design or manufacture of the part.

Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark 
Office. digital dna is a trademark of Motorola, Inc. All other product or service 
names are the property of their respective owners. Motorola, Inc. is an Equal 
Opportunity/Affirmative Action Employer.

© Motorola, Inc. 2003

DRM050/D

 

   

  

F

re

e

sc

a

le

 S

e

m

ic

o

n

d

u

c

to

r,

 I

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

 

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

n

c

.

..

Summary of Contents for DRM050

















































Reviews: