Installing the software and setting up the hardware
FRDM-HB2001-EVM evaluation board
, Rev. 1.0
20
NXP Semiconductors
5.2
Installing and using SPIGen on the computer
The latest version of SPIGen supports the MC33HB2001 and is designed to run on any Windows 8, Windows 7, Vista, or XP-based
operating system. To install the software, do the following:
1.
Go to the following website and click on the
Download
button:
.
2.
When the
SPIGEN: SPI Generator (SPIGen) Software
page appears, go to the
Device Drivers
section and click on the
Download
button associated with the description of the select environment. A wizard guides the user through the process.
3.
If instructed for the SPIGen wizard to create a short-cut, a SPIGen icon appears on the desktop. If elected not to create a
short-cut, the SPIGen executable is installed by default at C:Program Files\SPIGen.
Note:
Installing the device drivers overwrites any previous SPIGen installation and replaces it with a current
version containing the MC33HB2001 drivers. However, configuration files (.spi) from the previous
version remain intact.
4.
Launch SPIGen. The HB2000/HB2001 device should appear in the Device View panel at the left (see
).
Figure 16. SPIGen home page
5.
To access the HB2000/HB2001 tab in the SPIGen window, expand the HB2000/HB2001 folder in the Device View. Then click on
the
Registers
).
If the pre-programmed code on FRDM-KL25Z is accidentally erased, download "UsbSpiDongleKL25Z_SPIDrive_v512.srec" from the
following link:
