NXP Semiconductors
FS4500/FS6500 evaluation boards
KTFRDMFS4500-FS6500EVMUG
FS4500/FS6500 evaluation boards
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2017. All rights reserved.
User guide
Rev. 4.0 — 12 June 2017
3 / 34
3 Getting started
3.1 Jump start
NXP’s analog product development boards provide an easy-to-use platform for
evaluating NXP products. The boards support a range of analog, mixed-signal and power
solutions. They incorporate monolithic ICs and system-in-package devices that use
proven high-volume SMARTMOS technology. NXP products offer longer battery life, a
smaller form factor, reduced component counts, lower cost and improved performance in
powering state of the art systems.
1. Go to the relevant Tool Summary Page:
http://www.nxp.com/FRDMFS6522LAEVM
http://www.nxp.com/FRDMFS6523CAEVM
http://www.nxp.com/FRDMFS4503CAEVM
2. Review your Tools Summary Page.
3. Locate and click:
4. Download the documents, software and other information.
Once the files are downloaded, review the user guide in the bundle. The user guide
includes setup instructions, BOM and schematics. Jump start bundles are available on
each tool summary page with the most relevant and current information. The information
includes everything needed for design.
3.2 Kit contents/packing list
The FRDMFS6522LAEVM, FRDMFS6523CAEVM and FRDMFS4503CAEVM contents
include:
•
Assembled and tested FRDMFS65xx board
•
Assembled and test FRDM-KL25Z board
•
3.0 ft. USB-STD A to USB-B-mini cable
•
Connector, terminal block plug, 2 pos., str. 3.81 mm
•
Connector, terminal block plug, 8 pos., str. 3.81 mm
3.3 Required equipment
The EVM requires the following items:
•
Power supply with a range of 8.0 V to 40 V and a current limit set initially to 1.0 A
Standard A plug to Mini-B plug USB cable M/M
FlexGUI graphical user interface
FlexGUI register definition XML file
