Quick Start Guide
10
ADDITIONAL INFORMATION
Boot Switches
SW1101[1-4] are the boot configuration switches, the default boot device is eMMC/
uSDHC3, as shown in Table 4. If you want to try other boot devices, you need to
change the boot switches to corresponding values as listed in Table 4.
Table 4 Boot Device Settings
BOOT DEVICE
SW1101
SW1102
eMMC/uSDHC3
0100XXXXXX
XXXXXXXXXX
MicroSD/uSDHC2
1100XXXXXX
XXXXXXXXXX
QSPI NOR Flash
0110XXXXXX
XXXXXXXXXX
Serial Download Mode
1000XXXXXX
XXXXXXXXXX
Note:
1 = ON 0 = OFF X = Don’t Care
Debug Serial Console
Windows users may need to update the serial drivers on your computer. The drivers
can be found at https://www.ftdichip.com/Drivers/VCP.htm
