8
Quick Start Guide
SETTING UP THE SYSTEM
1
Connect USB
Debug Cable
Connect the micro-B end of a USB cable
into debug port J1701. Connect the other
end of the cable to a PC acting as a host
terminal. 2 UART connections will appear
on the PC. The console print will output
on “Enhanced COM port,” which can be
found in “Device Manager” of the PC.
Open the terminal window (i.e., Hyper
Terminal or Tera Term), choose the COM
port number that corresponds to the
“Enhanced COM port” and apply the
following configuration.
• Baud rate: 115200
• Data bits: 8
• Stop bit: 1
• Parity: None
• Flow control: None
2
Connect HDMI
Display
Connect an HDMI cable to the HDMI
connector Jack J1001. Connect the other
end of the cable to a HDMI display panel.
3
Connect
Mouse
Connect the mouse to the USB host
connector J903.
4
Connect Power
Supply
Connect the plug of the 12V power
supply to the DC power jack J902.
Summary of Contents for i.MX 8M
Page 1: ...Quick Start Guide i MX 8M Quad Evaluation Kit ...
Page 11: ......
