www.nxp.com
11
SETTING UP THE SYSTEM
CONTINUED
On the EVK the wm8524audio is the audio codec which drives the line-out jack. To
play the sample.wav audio through that port the following command should be
issued:
% aplay -Dplughw:1,0 sample.wav
5
Storage
• The 8MIC board should be stored in a dust free container or ESD bag. The
microphones may be damaged by dust particles entering the microphone port hole.
• If the EVK and 8MIC board are stored on a desk top it would be best to invert the
boards to prevent dust contamination.
