<*> Freescale DSPI controller
<*> User mode SPI device driver support
3. Use the
make
command to create the images.
The above operation can be replaced by executing the
make nxp_ls1028ardbXXXX_defconfig
file.
NOTE
16.5 Testing the BLE P click board
Use the following steps for testing the BLE P click board:
1. Running the blep_demo application.
The following log is displayed to indicate that the BLE P click board is initialized. At this time, you can scan for BLE P click
board from your mobile phone or your computer's Bluetooth device. The name of the BLE P click board used is “MikroE”
2. Connection log
Connect the BLE P click board via mobile app. On successful connection, the following log is displayed. Thereafter, the
application can communicate with the BLE P click board.
3. Disconnection log
NXP Semiconductors
BLE click board
Open Industrial User Guide, Rev. 1.8, 05/2020
User's Guide
187 / 199
