background image

 

 

NXP Semiconductors 

AN10050

 

Designing a Hi-Speed USB host PCI adapter using ISP1562/63

AN10050_4 

 

© NXP B.V.  2007. All rights reserved.

Application note 

Rev. 04 — 1 November 2007 

17 of 18

6. Legal 

information

6.1 Definitions 

Draft — 

The document is a draft version only. The content is still under 

internal review and subject to formal approval, which may result in 
modifications or additions. NXP Semiconductors does not give any 
representations or warranties as to the accuracy or completeness of 
information included herein and shall have no liability for the consequences 
of use of such information. 

6.2 Disclaimers 

General — 

Information in this document is believed to be accurate and 

reliable. However, NXP Semiconductors does not give any representations 
or warranties, expressed or implied, as to the accuracy or completeness of 
such information and shall have no liability for the consequences of use of 
such information. 

Right to make changes — 

NXP Semiconductors reserves the right to make 

changes to information published in this document, including without 
limitation specifications and product descriptions, at any time and without 
notice. This document supersedes and replaces all information supplied prior 
to the publication hereof. 

Suitability for use — 

NXP Semiconductors products are not designed, 

authorized or warranted to be suitable for use in medical, military, aircraft, 
space or life support equipment, nor in applications where failure or 
malfunction of a NXP Semiconductors product can reasonably be expected 
to result in personal injury, death or severe property or environmental 
damage. NXP Semiconductors accepts no liability for inclusion and/or use of 
NXP Semiconductors products in such equipment or applications and 
therefore such inclusion and/or use is for the customer’s own risk. 

Applications — 

Applications that are described herein for any of these 

products are for illustrative purposes only. NXP Semiconductors makes no 
representation or warranty that such applications will be suitable for the 
specified use without further testing or modification. 

6.3 Trademarks 

Notice: All referenced brands, product names, service names and 
trademarks are property of their respective owners. 

I

2

C-bus — 

logo is a trademark of NXP B.V. 

 

 

Summary of Contents for ISP1562



















Reviews: