KTPF3000FRDMEVMUG, Rev. 2.0
Freescale Semiconductor
5
Getting to Know the Hardware
3
Getting to Know the Hardware
3.1 Board Overview
The KITPF3000FRDMEVM Evaluation Board (EVB) is an easy-to-use circuit board allowing the user to exercise all the functions of the
PF3000 and PF3001 Power Management IC. This board can be used to emulate the PF3001.
A FRDM-KL25Z is mounted to the EVB as an integral component. The FRDM-KL25Z serves as an interface between the KITPF3000GUI
and the PF3000 or between the PF3001GUI and the PF3001. Analog-to-Digital Convertors (ADCs) in the FRDM-KL25Z monitor the
regulator voltages through the GUI.
3.2 Board Features
The board features are as follows:
•
PF3000 and PF3001 Power Management IC
•
Input supply using wall adaptor or lab power supply through banana jacks
•
Integrated FRDM-KL25Z as communication link between the EVB and a PC
•
Two 1 Amp E-Loads with configurable current
3.3 Device Features
This evaluation board features the following Freescale products:
Table 1. PF3000 Features
Device
Description
Features
PF3000
Power Management Integrated Circuit
(PMIC) for i.MX Series & i.MX 6 SL/SX
• Four adjustable high efficiency buck regulators: 1.75 A, 1.5 A, 1.25 A, 1.0 A
• 5.0 V, 600 mA boost regulator with PFM or Auto mode
• Six adjustable general purpose linear regulators
• Input voltage range: 2.8 V to 4.5 V or 3.7 V to 5.5 V
(1)
• OTP (One Time Programmable) memory for device configuration
PF3001
Power Management Integrated Circuit
(PMIC) for i.MX 7 and i.MX 6
SoloLite/SoloX/UltraLite Processors
• Three adjustable high efficiency buck regulators: 2.75 A, 1.25 A, 1.5 A
• Six adjustable general purpose linear regulators
• Input voltage range: 2.8 V to 4.5 V or 3.7 V to 5.5 V
(1)
Notes:
1.
Minimum start-up voltage is 3.1 V
