NXP Semiconductors
UM11587
KITVR5510xA0EVM Evaluation Kit User Guideline
3 Getting Ready
Working with the KITVR5510xA0EVM requires the kit contents, additional hardware and
a Windows PC workstation with installed software.
3.1 Kit contents
•
Assembled and tested KITVR5510xA0EVM connected to FRDM-K82F in an antistatic
bag
•
2.6 ft USB-STD A to USB-B-micro cable
•
Quick Start Guide
3.2 Additional hardware
In addition to the kit contents, the following hardware is necessary or beneficial when
working with this kit.
•
Power supply with a range of 5.0 V to 24.0 V and current limit set initially to 100 mA
•
Two power supply cables with banana connectors at one end
3.3 Windows PC workstation
This evaluation board requires a Windows PC workstation. Meeting these minimum
specifications should produce great results when working with this evaluation board.
•
USB-enabled computer with Windows 7 or Windows 10
3.4 Software
Installing software is necessary to work with this evaluation board. All listed software is
available on the evaluation board's information page at .
•
NXP_GUI_ PR_4.1.0: software interface GUI tool to generate debug scripts
UM11587
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
User manual
Rev. 1 — 3 May 2021
5 / 32
