Table 1. Related documentation (continued)
Document
Description
Link/how to access
QorIQ LS1028A Design
Checklist, AN12028
This document provides recommendations for new designs
based on the LS1028A SoC. This document can also be used to
debug newly designed systems by highlighting those aspects of
a design that merit special attention during initial system start-up
Contact FAE / sales
representative
Layerscape LS1028A BSP
This document explains how to use the QorIQ LS1028A BSP,
which is a Linux-based development kit, to evaluate and explore
the features of the LS1028A SoC
CodeWarrior Development
Studio for QorIQ LS series -
ARM V8 ISA, Targeting
Manual
This manual explains how to use the CodeWarrior Development
Studio for QorIQ LS series - ARM V8 ISA product
CodeWarrior Development
Studio for QorIQ LS series -
ARM V8 ISA, Targeting
Manual
CodeWarrior TAP Probe
User Guide
Provides details of CodeWarrior
®
TAP, which enables target
system debugging through a standard debug port (usually JTAG)
while connected to a developer workstation through Ethernet or
USB
CodeWarrior TAP Probe
User Guide
3 Hardware kit contents
The table below lists the items included in the LS1028ARDB hardware kit.
Table 2. Hardware kit contents
Item
Description
LS1028ARDB hardware assembly with enclosure
-
12 V, 6.67 A AC-DC power adapter
An external 12 V power adapter to power the board
Universal adaptor
-
DB9F-to-DB9F cable
-
Cable, USB3.1 Type C Male to USB3.0 Type A Female, 50 mm
-
Cable, DB9F-to-USB Type A (Windows 10 support), 1 m
-
Ethernet cable
-
Programmed 16 GB SD card
-
4 Chassis and board pictures
The figure below shows the front panel of the LS1028ARDB chassis.
NXP Semiconductors
Hardware kit contents
QorIQ LS1028A Reference Design Board Getting Started Guide, Rev. 0, 2/2019
User's Guide
2 / 18
