QUICK START GUIDE
MIMXRT1170-EVKB
MIMXRT1170-EVKB
Power Adapter Cable to 5V DC
In Header (J43)
HOW TO GET STARTED
The evaluation kit is shipped with an
MIMXRT1170-EVKB, a power adapter,
a camera and a Micro-B USB cable.
1. Plug the power adapter wire into
the MIMXRT1170-EVKB board 5V DC
IN header (J43) and switch on
5V DC IN (SW5).
2. The MIMXRT1170-EVKB board
comes preprogrammed with a
demo that will initiate the LED on
the board to flash when plugged in.
When the board is tilted, the green
LED gradually illuminates based
on the degree of tilt on the X-axis
(The onboard sensor U115 is
soldered). Or the LED will blinky
(The onboard sensor U115 is DNP).
3. Explore more out-of-box demos
and download software and tools at
www.nxp.com/MIMXRT1170-
EVKB/startnow
.
3
