NXP Semiconductors
UM11009
PCA9745B demonstration board OM13524
UM11009
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2016. All rights reserved.
User manual
Rev. 1 — 23 June 2016
5 of 28
Fig 1.
PCA9745B demo board (OM13524) connecting to the Fm+ development board (OM13260)
4.3 OM13524 connection to WIN-I2CUSB hardware adapter board
The Win-I2CUSB board should be disconnected from your PC before connecting the
OM13524 PCA9745B demo board on to it. The OM13524 board has a 9-pin male
connector (CON1) that connects to the 14-pin male connector (J1) on the Win-I2CUSB
board using six jumper wires as shown in the
Fig 2
.
CON1
(9-pin)
J1
(14-pin)
3.3V (pin 3)
3.3V (pin 2)a
SCL (pin 5)
SCLK (pin 4)
GND (pin 6)
GND (pin 6)
SDA (pin 7)
MOSI (pin 8)
SPI_SDO (pin 8)
MISO (pin 10)
SPI_CSN (pin 9)
SSN (pin 12)
Connect 6-jumper wires between the OM13524 board and the Win-I2CUSB board before
connecting the USB cable. Once both boards are connected, connect the USB cable and
start the Win-SPIUSB software. You are now ready to evaluate the PCA9745B.